Closest Location:
Fargo
Store Hours:
10:00AM-5:00PM
MAC'S Hardware
Genesis GTS10SB
15 A 4800 rpm motor. Extra-large 24 in x 20 in die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2 in wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0 to 45 deg. Bevel cut from 0 to 45 deg. Rocker ON/OFF switch. Optional sliding extension table expands rip capacity to 24 in. Includes 40T carbide tipped blade and heavy-duty metal stand. Weighs 55 lb.
| Arbor Size | : | 5/8 in |
| Current Rating | : | 15 A |
| Cutting Angle | : | 45 deg, 90 deg |
| Cutting Capacity | : | 24 in |
| Cutting Depth | : | 2-1/2 in at 45 deg, 3 in at 90 deg |
| Frequency Rating | : | 60 Hz |
| Includes | : | 40-Teeth Carbide Tipped Blade, Miter Gauge, Metal Stand, Push Stick, Rip Fence and Wrench |
| Material | : | Aluminum |
| Maximum Cutting Depth at 45 degrees | : | 2-1/2 in |
| Maximum Cutting Depth at 90 degrees | : | 3 in |
| Speed Rating | : | 4800 rpm |
| Table Dimensions | : | 24 in L x 20 in W |
| Voltage Rating | : | 120 V |
| Blade Diameter | : | 10 in |
- Oversized sliding miter gauge for miter cuts from 0 to 45 deg
- Self-aligning rip fence automatically locks front and rear
- Rocker ON/OFF switch with quick shut off cover
- Overload auto-shut off protection with reset switch
- Easy-to-use blade height control wheel
- Bevel cuts 0 to 45 deg for the most common cutting applications
- Tool-free installation of blade guard and anti-kickback pawls
- On board accessory storage miter gauge holder, blade holder and push sticker holder
- Heavy-duty metal work stand
- 2-1/4 in dust collection port
Owners/User Manual