Closest Location:
Fargo
Store Hours:
7:00AM-8:00PM
MAC'S Hardware
Simpson Strong-Tie
Simpson Strong-Tie NCA Series NCA2X10-16 Nailless Compression Bridging, 15-13/16 in L, 0.69 in W, Steel, Galvanized
- Model Number: NCA2X10-16
- UPC: 044315585401
- Store SKU:
-
Simpson Strong-Tie NCA Series NCA2X10-16 Nailless Compression Bridging, 15-13/16 in L, 0.69 in W, Steel, Galvanized
-
Promo Price:
-
- Supplier SKU:
- Web SKU: 101831317
- Supplier SKU:
Simpson Strong-Tie NCA2X10-16
The NCA provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this nail less compression bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The NCA features precision-formed V shaped prongs, in place of nails, to provide a secure grip before the drive-home blow for deeper prong penetration.
| Post/Joist Size | : | 2 x 10, 2 x 16 in |
| Material | : | Steel |
| Finish | : | Galvanized |
| Length | : | 15-13/16 in |
| Width | : | 0.69 in |
| Thickness | : | 20 ga |
- Nail less bridging installation eliminates callbacks for nail squeaks
- Precision-formed into a rigid "V" section
- May be installed before or after sheathing, from the top or bottom
- Galvanized (G90) for extra corrosion resistance
- Keeps floor system continuity and prevents joist rotation
- Installs with built-in prongs that eliminate nail squeaks
- Support floor joists with a depth-to-thickness ratio of six or more with bridging at intervals not exceeding 8 ft, if span is greater than 8 ft, install on 2 x 8 or larger joists, if span is greater than 16 ft, use more than one pair
- Tension bridging works only in tension, so must be used in cross pairs
- Install bridging tightly; loose installation may allow floor movement
Specification Sheet