The LTB provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this light tension-type bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The LTB features a staggered nail pattern to accommodate 2 x 8 and 2 x 10 joists and is designed for maximum nailing flexibility, with the option to use as few as two nail holes on each end and as many as six.
| Fastener Size |
: |
0.113 x 2 in |
| Finish |
: |
Galvanized |
| Length |
: |
20 in |
| Material |
: |
Steel |
| Post/Joist Size |
: |
2 x 8, 2 x 10 in |
| Thickness |
: |
22 ga |
- Keeps floor system continuity and prevents joist rotation
- LTB works only in tension, so must be used in cross pairs
- Galvanized (G90) for extra corrosion resistance
- Installation flexibility, with multiple fastener holes on each end in a staggered pattern
- Can be utilized with 6 and 8 in joists at 12 in O.C
- Install bridging tightly; loose installation may allow floor movement
- Requires two #10 screws at each end
-
Catalog
https://assets.unilogcorp.com/187/ITEM/DOC/Simpson_Strong_Tie_101869801_Catalog.pdf