Home > Fasteners > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES > LOAD BINDERS
Sort By:
1
S-Line 50025-10 Mini Chain Binder Koch 100942/48979 Mini Load Binder Red Devil 45943-22 Turnbuckle Ratchet Load Binder
Heat treated steel body with carbon steel hooks.  Intended for use in light duty farm, fencing and industrial binding applications where load factor is minimal.  Hook swivels 360 degrees and tightener is designed to toggle away from load. Stamped steel construction. Zinc finish. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended
Cambell 620-3205 Double Swivel Lever Load Binder S-Line 45943-10 Lever Chain Binder S-Line 45943-20 Turnbuckle Ratchet Chain Binder
Lever load binder used to tighten chain, typically for cargo securement. Double swivel lever, for chain size 1/4"/20 and 43, Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. DO NOT use for overhead lifting or hoisting or exceed working load limits. Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended
S-Line 45943-21 Turnbuckle Ratchet Chain Binder S-Line 45943-11 Lever Chain Binder Cambell 620-7504 Manual Ratchet Load Binder
Heat treated single piece steel handle and heat treated forged hooks with 360 degree swivels on both hooks to allow straight line pull.  Pre-lubricated ACME threaded screws require limited maintenance. Internal thread stop feature. E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury.  Ratchet mechanism and handle length is sufficient to break chain when overtightened.  Safety stops prevent threads from being overextended Drop forged and heat treated steel handle and hooks with 360 degree swivels on both hooks to allow straight line pull.  E-coat finish helps extend useful life of binder.  Meets or exceeds WSTDA T-6 and FMCSA standards.  Chain size limits designed to maximize working load limit (WLL) of transport chain being used.  Note: Chain binders are not constructed with G70 steel but instead engineered to meet or exceed the stated working load limit marked on the handle.  G70 is a chain rating only.  WARNING: Secure by hand.  Never use ?cheater bar? or attempt to overtighten binder due to risk of personal injury due to lever snap back or chain breakage.  Only approved handle extensions should be used to release tension gradually. Ratchet load binder used to tighten chain, typically for cargo securement. 8" in take-up. For chain size 5/16" (System 7) and for chain size 3/8" (System 4) Meets U.S. D.O.T. 393.100-393.102 requirements for use with chain. DO NOT use for overhead lifting or hoisting or exceed the working load limit.
   
 
1