Home > Fasteners > NUTS, BOLTS, SCREWS > CONSTRUCTION SCREWS - PACKAGED
Choose a sub category:
SCREWS - PKG - DRYWALL -COARSE SCREWS - PKG - DRYWALL - FINE SCREWS - PKG- DRYWALL -SELF DR
SCREWS - PKG- DECK - COATED SCREWS - PKG- DECK - GALV SCREWS - PKG - DECK - SS
SCREWS - PKG- COMPOSITE -COAT SCREWS -PKG- TRIM/FINISH -COAT SCREWS - PKG- TRIM/FINISH - SS
SCREWS - PKG- MULTI USE -COAT SCREWS - PKG- MULTI USE -YLW/Z SCREWS - PKG- MULTI USE -PHOS
SCREWS - PKG - STRUCTURE -COAT SCREWS - PKG - LANDSCAPE TIMBE SCREWS - PKG- MTL BLDG -HEX DR
SCREWS - PKG- MTL BLDG -HEX PI SCREWS - PKG- MTL BLDG -FH DRI SCREWS - PKG- CEMENT BOARD
SCREWS - COLLATED - DRYWALL SCREWS - COLLATED - FLOOR -YLW SCREWS - COLLATED - DECK -COAT
SCREWS - COLLATED - DECK -SS SCREWS - COLLATED- CEMENT BOAR
Sort By:
1
SCREW M/P FRAME/DECK 8X1-1/4IN Pro-Fit 0288108 Drywall Screw SCREW M/P FRAME/DECK 8X1-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Use for drywall to 20 gauge to 14 gauge steel studs. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
Pro-Fit 0286138 Drywall Screw Pro-Fit 0286158 Drywall Screw Pro-Fit 0280058 Drywall Screw
Use for drywall to wood studs and all purpose wood fastening. Use for drywall to wood studs and all purpose wood fastening. Use for drywall to light gauge steel studs.
Pro-Fit 0280158 Drywall Screw Pro-Fit 0280208 Drywall Screw SCREW FIN/TRIM 8X1-1/2IN
Use for drywall to light gauge steel studs. Use for drywall to light gauge steel studs. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW M/P FRAME/DECK 8X1-3/4IN Rock On 23310 Cement Board Screw SCREW MULTI-PRPS FRM/DCK 8X2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
Pro-Fit 0302178 Drywall Screw Pro-Fit 0302138 Drywall Screw Pro-Fit 0302158 Drywall Screw
Pro-Fit Drywall Screw, Multi-Purpose, NO 8 Screw, 3 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects Pro-Fit Drywall Screw, Multi-Purpose, NO 7 Screw, 2 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects Pro-Fit Drywall Screw, Multi-Purpose, NO 7 Screw, 2-1/2 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects
Pro-Fit 0302078 Drywall Screw Pro-Fit 0302108 Drywall Screw TieMaster GTIE4RP Framing Screw
Pro-Fit Drywall Screw, Multi-Purpose, NO 6 Screw, 1-1/4 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects Pro-Fit Drywall Screw, Multi-Purpose, NO 6 Screw, 1-5/8 in Length, Phillips Drive, Coarse Thread, Yellow Zinc Plated, Gold, For Interior Projects Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
SCREW TRIM 8X2IN              SCREW FIN/TRIM 8X2IN          Teks 21408 Roofing Screw
SCREW TRIM 8X2IN
Our Price: $9.99
SCREW FIN/TRIM 8X2IN
Our Price: $9.99
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction.
Teks 21412 Roofing Screw SCREW M/P FRAME/DECK 8X2-1/2IN TieMaster GTIE412RP Framing Screw
Self-sealing neoprene washer for waterproof applications. Premium finish provides exceptional corrosion resistance in harsh outdoor environments. For metal-to-metal or metal-to-wood applications. Applications: Attaching roofing and wall panels to steel framing, roofing panels over insulation to wood structure, pole barn construction. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
TieMaster GTIE5RP Framing Screw SCREW STRUCTURAL 1/4X1-1/2IN  SCREW RSS 10X2-1/2IN
SCREW RSS 10X2-1/2IN
Our Price: $10.99
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW R4 FRAME/DECK 9X2IN     SCREW R4 FRAME/DECK 9X2-1/2IN SCREW RT COMPOSITE 8X2-1/2IN
SCREW R4 FRAME/DECK 9X2IN
Our Price: $10.99
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RT CMPST TRIM WHT 8X2IN SCREW FIN/TRIM 8X2-1/2IN      SCREW M/P FRAME/DCK 10X3-1/2IN
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $11.99
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
TieMaster GTIE6RP Framing Screw Pro-Fit 0313108 Cement Board Screw Pro-Fit 0313078 Cement Board Screw
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Use for attaching cement board to wood studs. Approx. 166 count per lb. Use for attaching cement board to wood studs. Approx. 166 count per lb.
Type XT-II GTXT112PP Deck Screw Type XT-II GTXT114PP Deck Screw Type XT-II GTXT200PP Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power.
Type XT-II GTXT212PP Deck Screw Type XT-II GTXT300PP Deck Screw SCREW RSS 10X3-1/8IN
SCREW RSS 10X3-1/8IN
Our Price: $12.99
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW RSS MINI 5/16X3-1/8IN   SCREW R4 FRAME/DECK 9X3-1/8IN SCREW R4 FRAME/DECK 10X3-1/8IN
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW R4 FRAME/DECK 10X4IN    Pro-Fit 0281158 Deck Screw Pro-Fit 0281198 Deck Screw
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Use for exterior deck and railing projects where rust resistance is important. Use for exterior deck and railing projects where rust resistance is important.
Type XT-II GTXT400PP Deck Screw XT II GTXT312PP Wood Screw Pro-Fit 0281178 Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Use for exterior deck and railing projects where rust resistance is important.
SCREW RT CMPST TRIM WHT 8X2-1/ SCREW FIN/TRIM WHT 8X2-1/2IN  SCREW FIN/TRIM 8X3-1/8IN
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $13.99
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW R4 FRAME/DECK 10X2-1/2IN SCREW RT CMPST TRIM WHT 8X2-3/ TieMaster GTIE8RP Framing Screw
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
SCREW RSS MINI 5/16X4IN       SCREW RT CMPST TRIM WHT 8X3-1/ SCREW FIN/TRIM 9X4IN
SCREW RSS MINI 5/16X4IN
Our Price: $14.99
SCREW FIN/TRIM 9X4IN
Our Price: $17.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW FIN/TRIM 8X1-1/2IN      Acorn SW-MW1W250 Self-Tapping Screw Acorn SW-MW1LG250 Self-Tapping Screw
SCREW FIN/TRIM 8X1-1/2IN
Our Price: $17.99
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW1LS250 Self-Tapping Screw Acorn SW-MW1TP250 Self-Tapping Screw Acorn SW-MW1MT250 Self-Tapping Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
SCREW FIN/TRIM 9X5IN          TieMaster GTIE212CP Framing Screw TieMaster GTIE10RP Framing Screw
SCREW FIN/TRIM 9X5IN
Our Price: $18.99
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins.
SCREW FIN/TRIM 8X2-1/2IN      Acorn SW-MM121G250 Self-Tapping Screw Acorn SW-MW2G250 Self-Tapping Screw
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $19.99
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW15BN250 Self-Tapping Screw Acorn SW-MW15BG250 Self-Tapping Screw DuraSpin 06A162P Collated Drywall Screw
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. 50 screws per flat strip. Gray phosphate finish. Applications: Drywall to Wood. Compatible Tools: DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662)
SCREW RT CMPST TRIM 8X2-1/2IN TieMaster GTIE4CP Framing Screw Camo 0345220S Deck Screw
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
SCREW RSS MINI 5/16X6IN       Acorn SW-MW2BN250 Self-Tapping Screw Acorn SW-MW2BG250 Self-Tapping Screw
SCREW RSS MINI 5/16X6IN
Our Price: $23.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. #9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW2BK250 Self-Tapping Screw Acorn SW-MM1212G250 Self-Tapping Screw SCREW W/WING PFH NO10X1-7/16IN
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. Metal to metal screws are sealing self-drilling tapping screws made from C1022 steel, case hardened for roofing and siding applications. The screw drills its own hole, forms mating threads and makes a complete secure fastening in a single operation. Acorn International metal to metal screws have a #3 drill point for fastening sheets to purlins up to 1/4" total thickness with no predrilling. #12-14 screws are 5/16" across flats hex washer head and #14-14 screws are 3/8" across flats hex washer head with assembled EPDM washer for easy driving and conformance to the metal surface for a secure and long-lasting seal.  All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. For attaching wood to metal. Strong holding power. Features sharp points and can be used where a flush appearance is needed. Approved for teated lumber.
TieMaster GTIE412CP Framing Screw Tapcon 23305 Cement Board Screw SCREW R4 FRAMING 12/14X5-5/8IN
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Designed for attaching Durock, Wonderboard or equivalent glass-mesh cement backerboard to wood or light gauge steel studs. Patented serrated head design countersinks for flush seating at any angle, providing a smooth surface for tile. Star drive recess with included T-25 bit provides for one-handed installation. Feature a Climacoat corrosion resistant finish that prevents rust from bleeding into grout. Perfect for use in high moisture areas such as baths, showers, countertops, and floors. Conforms to ANSI A108.11 for cement board attachment. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAMING 10X2-1/2IN  SCREW FIN/TRIM 83-1/8IN       SCREW M/P FRAME/DCK 12X6-3/8IN
SCREW FIN/TRIM 83-1/8IN
Our Price: $29.99
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
TieMaster GTIE5CP Framing Screw TieMaster GTIE6CP Framing Screw Acorn SW-MW1415G250 Self-Tapping Screw
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. #14-14 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. #14 screws are used in high wind areas as well as for replacement or as "goof screws". A 5/16" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size.
Acorn SW-MW25W250 Self-Tapping Screw Camo 0345148 Deck Screw SCREW MULT-PRPS FRM 10X3-1/8IN
#9-15 metal to wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4" across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for a secure and long-lasting seal. The twin lead type 17 point and hi-lo threads offer faster drive time and greater resistance to pullout. All screws are 1,000 hour salt spray test dacro coated. Colored screws are powder coated over the dacro base coating. All Acorn International screws are packed 250 pieces in a heavy duty tear-off resealable bag, UPC coded and retail ready. All bag and carton labels are trilingual. Cartons are heavy duty cardboard of uniform size. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials.
TieMaster GTIE8CP Framing Screw SCREW ROOFING HWH NO9 X1-1/2IN SCREW RSS 5/16X5-1/8IN
SCREW RSS 5/16X5-1/8IN
Our Price: $39.99
Flat head star #40 drive timber fastener for retaining walls, decks, docks, boardwalks and other general wood construction. General wood to wood construction: ledger, laminated beams, joist, under deck connections, angle brackets, dimensional lumber, retaining walls, log cabins. Provides secure, weather-sealing metal-to-metal fastening with strong holding power without the need to pre-drill. Engineered drill-point and flute remove material efficiently and properly size the hole for threads. Ideal for fastening thicker gauge (20-12-Gauge) exterior metal to metal where a sealing washer is needed. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Type XT-II GTXT200FP Deck Screw Type XT-II GTXT212FP Deck Screw Type XT-II GTXT300FP Deck Screw
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power.
SCREW RSS 5/16X3-1/8IN        DuraSpin 08S250W497 Composite Collated Deck Screw DuraSpin 08D250W Collated Deck Screw
SCREW RSS 5/16X3-1/8IN
Our Price: $47.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Applications: Composite materials. Anti-Mushroom. Compatible Tools:  DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512) 50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
SCREW MULTI-PRPS FRM/DCK 9X2IN SCREW M/P FRAME/DCK 10X2-1/2IN SCREW M/P FRAME/DCK 10X3-1/8IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DCK 10X3-1/2IN SCREW MULT-PRPS FRM/DCK 10X4IN SCREW M/P FRAME/DECK 9X2-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DECK 9X3-1/8IN SCREW M/P FRAME/DECK 8X1-3/4IN SCREW M/P FRAME/DECK 8X1-1/4IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW M/P FRAME/DECK 8X1-1/2IN SCREW MULTI-PRPS FRM/DCK 8X2IN SCREW M/P FRAME/DECK 8X2-1/2IN
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal. #6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal.
SCREW RSS 5/16X4IN            SCREW RSS 5/16X3-1/2IN        SCREW RSS INDV 5/16X3-1/8IN
SCREW RSS 5/16X4IN
Our Price: $49.99
SCREW RSS 5/16X3-1/2IN
Our Price: $49.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
Type XT-II GTXT312FP Deck Screw XT II GTXT400FP Wood Screw SCREW RT CMPST TRIM 8X2-1/2IN
Coated fasteners ideal for pressure treated lumber applications and for all outdoor wood construction such as decking, patios, lawn furniture, window boxes.  Reduces wood splitting and superior holding power. NanoGard fluoropolymer coated fasteners are designed for pressure treated lumber applications and for all outdoor wood construction for decking, patios, lawn furniture, window boxes, etc. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RT CMPST TRIM 9X2-1/2IN SCREW RT CMPST TRIM WHT 8X2IN SCREW RT CMPST TRIM WHT 8X2-1/
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW FIN/TRIM 8X2IN          SCREW FIN/TRIM 8X2-1/2IN      SCREW FIN/TRIM 8X3-1/8IN
SCREW FIN/TRIM 8X2IN
Our Price: $52.99
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $52.99
SCREW FIN/TRIM 8X3-1/8IN
Our Price: $52.99
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use.
SCREW FIN/TRIM WHT 8X2IN      SCREW FIN/TRIM WHT 8X2-1/2IN  SCREW PKG 10X3-1/8IN
SCREW FIN/TRIM WHT 8X2IN
Our Price: $52.99
SCREW PKG 10X3-1/8IN
Our Price: $52.99
Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Zero stripping recessed star drive. Trim head for a clean finished look. W-Cut?: Low torque, smoother drive. ?ZIP-TIP? for no pre-drilling, faster penetration. ESR-3201 approved for structural application. Case Hardened Steel for high tensile, torque and shear strength. Climatek coating is AC257 code approved for use in treated lumber. For interior and exterior use. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW RSS 5/16X6IN            DuraSpin 08D200W Collated Deck Screw SCREW RT CMPST TRIM 8X3-1/8IN
SCREW RSS 5/16X6IN
Our Price: $52.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. 50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512) Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RSS INDV 3/8X8IN        SCRW WD S-TAP STAR-DR 5/16X4IN Camo 0345228S Deck Screw
SCREW RSS INDV 3/8X8IN
Our Price: $59.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry.
Simpson Strong-tie S10250DJT Deck Screw SCREW RSS INDV 5/16X6IN       SCREW RSS INDV 5/16X5-1/8IN
SCREW RSS INDV 5/16X6IN
Our Price: $79.99
Painted heads that escape notice in the material. Durable, powder-coated finish. Course threads approximately 2/3 of the way up shank to draw board tightly to substrate. ' Beaver Bite' type 17 auger point for extra fast starts. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW RSS INDV 3/8X12IN       XT II GTXT312 Wood Screw SCREW RSS INDV 3/8X10IN
SCREW RSS INDV 3/8X12IN
Our Price: $87.99
SCREW RSS INDV 3/8X10IN
Our Price: $95.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. NanoGard fluoropolymer coated fasteners are designed for pressure treated lumber applications and for all outdoor wood construction for decking, patios, lawn furniture, window boxes, etc. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW M/P FRAMING 10X2-1/2IN  SCREW M/P FRAMING 10X3-1/8IN  SCREW RT CMPST TRIM 8X2-1/2IN
Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials. Corrosion resistance for harsh environments. Zero stripping recessed star drive. Interior/exterior use. No pre-drilling unless material requires. Self-countersinking. Star head recess/non stripping heads. Can be used with fibrous materials. Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use.
SCREW RT CMPST TRIM 8X2IN     SCREW FIN/TRIM 8X2IN          SCREW FIN/TRIM 8X2-1/2IN
SCREW RT CMPST TRIM 8X2IN
Our Price: $99.99
SCREW FIN/TRIM 8X2IN
Our Price: $99.99
SCREW FIN/TRIM 8X2-1/2IN
Our Price: $99.99
Zero stripping with 6 points of contact. Recessed star srive eliminates mushrooming. Trim head for a clean finished look. W-Cut: Low torque, smoother drive ZIP-TIP for no pre-drilling, faster penetration. ESR-3201 Approved for structural application. Case hardened steel for high tensile, torque and shear strength. Climatek Coating is AC257 code approved for use in treated lumber.For interior and exterior use. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip.
SCREW FIN/TRIM 9X2-1/2IN      SCREW RSS 3/8X8IN             DuraSpin 08D250S Collated Deck Screw
SCREW FIN/TRIM 9X2-1/2IN
Our Price: $99.99
SCREW RSS 3/8X8IN
Our Price: $99.99
Pheinox Stainless steel (305). The smallest head for a clean look. T-10 bit included. Zero stripping recessed star drive. Trim head for a clean finish. Low torque W-Cut Thread. No pre-drilling engineered Zip-Tip. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. 50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)
Camo 0345244S Deck Screw Camo 0345224S Deck Screw SCREW RSS 3/8X10IN
SCREW RSS 3/8X10IN
Our Price: $159.99
For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. For use with Marksman tools. A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting. The star drive offers more points of contact for better performance and reduces slippage and wear. Aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry. Unique trimhead design provides a less visible point of entry. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
SCREW RSS 5/16X5-1/8IN        SCREW RSS 3/8X12IN            SCREW RSS 3/8X6IN
SCREW RSS 5/16X5-1/8IN
Our Price: $179.99
SCREW RSS 3/8X12IN
Our Price: $179.99
SCREW RSS 3/8X6IN
Our Price: $299.99
Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications. Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets provide a clean hole, reduces splitting, and bore with precision. ESR-3201 Approved for structural application. Climatek Coated: AC257 code approved for use in treated lumber. For interior/exterior use in: carrying beams, ledger boards, stair rails, deck posts, playground equipment and other professional applications.
   
 
1