Home > Heating & Cooling > FIREPLACES & STOVES > STOVE PIPE & ACCESSORIES > PELLET PIPE FITTINGS
Sort By:
1
Selkirk 243520 Wall Bracket Pellet Pipe 243805 Horizontal Termination Stove Pipe Cap 8 in OD Selkirk 243410 Ceiling Support
For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3" from wall. UL Listed. Horizontal Termination Cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL Listed. Type L pellet vent ceiling support/firestop.
Pellet Pipe 243230B Type L Vent Stove Pipe Elbow Pellet Pipe 243100 Stove Pipe Tee With Cap Selkirk 284875 High Elevation Stove Vent Kit
Type L vent systems for pellet stove applications.Used to orient pipe between vertical and horizontal orientation. Rated for flue temperatures up to 570 degrees F. Model VP may be installed with a minimum 1" air space clearance to combustible surfaces, framing lumber, drywall, and plywood. UL Listed. Type L Air Insulated Pellet Vent Tee with Cap designed for use in changing the orientation of the vent from horizontal to vertical and making inspection and cleaning of pellet stove system easier. UL Listed. For pellet and corn appliances. Kit contains: 4" horizontal cap, 4" 90-degree elbow, 4" wall bracket, (5) 4" one-foot pipe lengths, 4" tee with cleanout, 4" wall thimble, 4" tee support, 3" to 4" pellet increaser, 4" pipe connector, and 3" pipe connector. System rated for flue temperatures up to 570 degrees. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.
   
 
1